Note: PRODUCT BELOW DESCRIBED FOR DAZ STUDIO. POSER VERSION IS AVAILABLE AS WELL WITH POSE SUPPORT FOR V4.

Product: Interrogation 2 Core Pack FOR DAZ STUDIO AND POSER.

Vendor/Creator: Davo or Davorama

store support forum: https://www.renderotica.com/community/forums.aspx?g=topics&f=2878
Copyright (c) 2025 davo. All rights reserved. Not intended for redistribution.
-----------------------------------------------------------------------------------------------------------------------------------
A unique holding cell for interrogations or perverse pleasure, the Interrogation 2 Core pack get your favorite characters squirming!
-----------------------------------------------------------------------------------------------------------------------------------
SPECIAL NOTE 1: Posing for Genesis 8/9 figures is based on the STANDARD, NON-MORPHED OR ALTERED figures. If you have applied morphs or altered body shapes or proportions, you must manually adjust the character and device positions if connection points are not touching. If you do have to alter the poses, you can do this to one side of the device and one side of your character then use the symmetry command to mirror the result to the other side.
Genesis 9 figure should have the female body shape morph applied before posing.
-----------------------------------------------------------------------------------------------------------------------------------
SPECIAL NOTE 2: Iray is the render engine of choice. This package only includes materials that will look good in Iray.
-----------------------------------------------------------------------------------------------------------------------------------
Daz Studio System Requirements:
- PC and Mac compatible
- Requires Daz Studio 4+ (created using Daz Studio 4.2)
- - All files in .duf, .ds*, .png and .jpg format.

Poser System Requirements:
- PC and Mac compatible
- Backwards compatible to Poser 8+
- - All files in .obj, .cr2, .png and .jpg format.
----------------------------------------------------------------------------------------------------------------------------------

unzipping instructions included in product readme file. Easypose pdf tutorial also included.
----------------------------------------------------------------------------------------------------------------------------------
Package Features:
----------------
CELL ROOM FOLDER
----------------

- Cell Room: This is the cell room environment. It features a foyer area for employees which has a poseable entry door and a door to a small office. The barred cell wall has a poseable door. The cell room area is larger and has 4 repositionable lamps in the ceiling. All walls and ceiling can be moved out of view for better camera angles and views. All lamps and lights are emmissive/ambient lit so they will glow in a dimly lit scene.
A Cell Room Combo figure is provided (in a subfolder) which has many of the room elements already positioned and pre-parented, you just need to add the restraints of choice and of course, your favorite characters!

- Bed: This is a simple metal bed frame with filthy mattress, arm chains, leg chains and neck chain. The bed also has a metal grid to lay on in the event you want to convert it to an electro torture bed.
Poses for G8F and G9F are provided in 2 versions, poses (a) with the mattress and (b) without the mattress.
Read First icon with parenting and cuff information is provided in the pose folders. Poses for G8F and G9F.

- Holding Cell: This is a stand alone concrete cell with uncomfortable seating shelf and 2 wrist and ankle chains which are poseable. Door opens and closes. An emmissive/ambient lit lamp in fitted into the inside ceiling.
Read First icon with parenting and cuff information is provided in the pose folders. Poses for G8F and G9F.

- Cabinet: Simple wall hanging cabinet with 2 poseable doors. This cabinet is included in the Cell Combo Set.

-Electic Box 1 and 2: Simple wall mounted electrical junction boxes. Each has a length morph for the top and bottom pipe. These are included in the Cell Combo Set.

- Flood Light: This is a heigh and angle adjustable flood light that can be used as a heating element or to shine more light on your subjects.

- Fuck Stick: This is a morph shape adjustable dildo taped onto a metal armature. Armatures have length morphs and angle adjustable.

- Locker: A simple locker with opening door. This locker is included in the Cell Combo Set.

- Pillar: This is a simple square pillar that goes from floor to ceiling. This is good for mounting the mount restraint devices onto.

- Table and Table Chair: These are simple seating table and plastic molded chair. You can add these for interest. These are included in the Cell Combo Set.

---- Cell Combo Set Subfolder ----

- Cell Room Combo: This is the Cell room complete with pre-parented room elements described above. Simple insert into your scene and start populating the cell room area with your favorite characters and restraint devices! The lighing is emmissive/ambient lit, so you can choose the "scene only" option in DS environment settings. Add the flood light for more illumination as needed!

--------------------
ELECTRO FOLDER
--------------------

- Read First: These informational icons have instructions for the items in the library, please click on and read them for some directions.

SPECIAL NOTE ABOUT CABLES: The cable on the eCable, ePads and Electo-Wand have easypose bending tech. The first segment of each cable has an overall length slider that will shorten or lengthen the entire cable length. The second segment and subsequent 20th segments have master bending nodes.
There are no specific poses for the cables since their use is to far ranging. Simply pose the cables out of view so a connection is implied or pose toward the rear side of the Electo-Max, you don't need to be accurate, it is implied there is a connection for most 2d artwork.
A pdf tutorial is included in the product zip file for Easy Pose bending technology. Please review this PDF.

- eCable Black and Red: These eCable figures are meant to be added to any piece of metal equipment then pose the easypose cables back toward the Electo-Max III figure. The eCable base has a slight bending morph to fit to curved metal objects. Just place it on the equipment of choice and parent it in place. Pose the easypose cables back toward the Electo-Max.

- Epad 1 and 2: ePad 1 is intended to cover your characters nipples, the ePad 2 is intended to be stuck on the skin of your character. Both pads have size and shape morphs on the pad or cup. Place and parent these on your character then pose the easypose cables out of view.

- Electo-Wand: This is a hand held electro wand with easypose cable. The handle/rod has size/shape morphs. These is a stand alone figure as well as wearable preset for genesis 8 and 9 male and female figures. Select your character, then apply the preset, the hand will pose and the wand will parent to the right hand. See note about cable posing above.
Poser version has wand positioning and hand pose files.

- Electo-Max III: This is a electo device control panel with built in battery. The needle, dial, lever and handle are poseable. There are 4 plug in ports on the rear of the device if you want to take the time to pose the epad, wand and ecable cords into it.

-------------------
MOUNTS FOLDER
-------------------

- Read First: These informational icons have instructions for the items in the library, please click on and read them for some directions.

- Mount 1: This is a wall mounted restraint device that allows easy access to your characters genital area complete with a humiliating pose. Most parts of the mount are morph size/shape adjustable for custom fitting and posing. There is a pillar in the cell room folder that you can place the mount onto if you wish.
Read First icon with parenting and cuff information is provided in the pose folders. Poses for G8F and G9F.

------------------
RESTRAINTS FOLDER
------------------

- Read First: These informational icons have instructions for the items in the library, please click on and read them for some directions.

- Hip Cuff (for G8F/G9F): This is a stand alone hip cuff and wearable preset version for Genesis 8 and 9 Females. The wearable preset will automatically place on the abdoment/spine, arms will pose and basic iron wrist cuffs will apply. This restraint is a good alternative to just having hands bound behind the back.
This restraint also comes in a couple of the restraint pose folders as well. The links on the hip cuff have some angle bend morphs.
Poser version has this hip cuff as a smart prop for V4.

- Restraint 01: This is an uncomfortable restraint with 2 options for a crotch saddle. Most parts on the restraint are morphs size/shape adjustable for custom fitting and posing adjustments. There is a metal rod saddle and wood triangular saddle to sit on. Pose files are provided to chose between the 2 options. The metal rod saddle has a hiddin plug inside which can be used to attach an eCable to if you want to make this an electrified device.
Read First icon with parenting and cuff information is provided in the pose folders. Poses for G8F and G9F.

- Restraint 02: This is a weighted horsey/saddle restraint that has weighted armatures. As you add weight, the saddle is forced higher, creating more pressure on your characters genitals. You can hide the weights visibility in the scene tab (DS) or parameters settings (Poser). When the saddle is raised or lowered, the angle on the weight armatures changes automatically, you will need to adjust the weigth rod angles manually.
Read First icon with parenting and cuff information is provided in the pose folders. Poses for G8F and G9F.

- Weight and Weight Stack: This a stand alone weight and set of parented weights you can place on the floor for interest and room clutter.

- Restraint 03: This wooden box holds the shins, arms and head out of view while bent over in a compromising pose. Mid section of box top has poseable latches and securing rings, it is repositionable.
Read First icon with parenting information is provided in the pose folders. Poses for G8F and G9F.

- Restraint 04: This unique restraint keeps your character in an inverted froggy position, exposing the genitals to the ceiling. Thigh cuffs can open and close and have securing rings. Most parts are size and shape adjustable for custom fits.
Read First icon with parenting and cuff information is provided in the pose folders. Poses for G8F and G9F.

- Restraint 08: This is high requested metal chair with poseable ankle, wrist and neck cuffs built in. Most parts on the restraint have size/shape morph adjustments for custom fitting and posing. The seat has an opening for use with fuck machings and the fuck stick if desired. This restraint is also good for attaching a couple eCables to it to make it an electrified chair device.
Read First icon with parenting and cuff information is provided in the pose folders. Poses for G8F and G9F.

- Restraint 12: This simple plate with wrist and neck chains keeps your character in the modern "chicken" pose, bent over with head down, buttocks up!
Read First icon with parenting and cuff information is provided in the pose folders. Poses for G8F and G9F.

- Restraint 13: This post with poseable neck and wrist chains also keeps your character in a semi "chicken" or bent over easy access pose. Post is height adjustable.
Read First icon with parenting and cuff information is provided in the pose folders. Poses for G8F and G9F.

-----------------------------------
Cuffs Libraries:
----------------------------------
Props/Davo/Cuffs Basic Iron: (same cuffs are available for V4 and M4 in the Poser version)

There are subfolders for G8F,G8M and G9F These folders contain smart prop cuffs to use in conjunction with the most of Davo's packages. These smart props will automatically position and parent to your characters.
To apply the cuffs, click on your character in your preview window, then click to add each cuff, they will position automatically.
There are options to apply all cuffs and neck cuffs, or just both hands or just both feet.
Also included in the folder is an action that will remove all the cuffs at once. Be warned, this will only clear the very first set of cuffs
inserted into your scene, any other cuffs will not be removed.
Also included is a material preset called _Update Iray: This will apply the cuffs materials to older sets of cuffs you may have purchased previously with Davo/Freeone products. Select a cuff or neck cuff then apply the _Update Iray and it will take the preferred texture.

----------------------------------------------------------------------------------------------------------------------------------------------------------
READ FIRST ICONS IN MOST FOLDERS! PLEASE READ THEM!
----------------------------------------------------------------------------------------------------------------------------------------------------------
Each pose folder and most other folders has a READ FIRST icon, click on the icon to get information on what parts of restraints or devices to parent items to and which cuffs to use with the poses. Other useful information can be found in these READ FIRST icons.

---------------------------------
More detailed instructions are included in the products readme files.